Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Rate Limiting -Cisco 5508

Hello all,

Can anyone guide me how to rate/bandwidth limit for the Guest WLAN (towards internet) in Cisco 5508 (7.4.100.60) ..?

Any brief document available for this..?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Rate Limiting -Cisco 5508

Nope... It's a policy map that is used in the wired side.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
6 REPLIES
New Member

Rate Limiting -Cisco 5508

Hello,

Here is one cisco doc that might help you out with rate limiting with 5508:

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bd3900.shtml

New Member

Rate Limiting -Cisco 5508

Thanks for sharing the link.

What will be the impact if we do it on the Guest wlan..?

Any best practice to be followed..?

New Member

Rate Limiting -Cisco 5508

Any one can suggest me here..?

Hall of Fame Super Silver

Re: Rate Limiting -Cisco 5508

Try this

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080baf502.shtml

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Rate Limiting -Cisco 5508

Thanks for your reply Scott..

This is per user based and that too we have to define policy on the switch side for UP/Down Stream traffic, is it..?

Is there any thing to do with WLC QOS part ...? I mean to say any config on WLC required to accomplish this..?

KVS

Hall of Fame Super Silver

Re: Rate Limiting -Cisco 5508

Nope... It's a policy map that is used in the wired side.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
1016
Views
0
Helpful
6
Replies
CreatePlease login to create content