05-12-2014 10:21 AM - edited 07-05-2021 12:49 AM
Hello Guys,
I have setup guest SSID and user can connect to Internet, when the User connect to SSID they get the IP from DHCP and for internet they need to go to authtication page and administrator give internet acceptance. Now the problem is Users are not able to go to Authentication page directly, they have to manually type the IP address.
Need help on webpage redirect, let say when user get the IP from DHCP, he will open any web page so I want authentication page should open automatically instead of typing IP manually .
Any help will be appreciated.
Thanks
Solved! Go to Solution.
05-13-2014 03:54 PM
Hi,
Most times this is dns related problem.
Clients need to receive a valid dns server in order to be redirected to the guest web page.
Do you use the internal WLC web page or something else like ISE?
You can test it using a public dns server like 8.8.8.8.
Hope this helps,
Regards.
05-14-2014 02:48 AM
yes if no changes were made to the configuration only option that this is not happening is due to DNS issue try to check if the URL is resolved correctly before any other troubleshooting.
************* Do rate helpful posts************************
05-13-2014 03:54 PM
Hi,
Most times this is dns related problem.
Clients need to receive a valid dns server in order to be redirected to the guest web page.
Do you use the internal WLC web page or something else like ISE?
You can test it using a public dns server like 8.8.8.8.
Hope this helps,
Regards.
05-14-2014 02:48 AM
yes if no changes were made to the configuration only option that this is not happening is due to DNS issue try to check if the URL is resolved correctly before any other troubleshooting.
************* Do rate helpful posts************************
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide