Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Reducing Power Transmission on multiple LAP at one time

Hi Cisco Support Community,

I'm trying to modify the power transmission control of multiple Lightweight Access Points (1131 AG E K9) at one single time on WLC 4400 or WCS.

It is effectively possible to configure the power transmission per LAP and in global on WLC 4400 but i need to configure it per group of LAPs =i.e group X of 10 LAPs will have a power Threshold of X -dBm and group Y of 15 LAPs with Y -dBm.

Any help will be much appreciated.

I thank you in advance.

Best Regards,

Pascal.

  • Getting Started with Wireless
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Reducing Power Transmission on multiple LAP at one time

You should be able to create a separate ap template in WCS. One for Group X and another for Group Y. Then you should be able to set the TX power level (not dbm).

Sent from Cisco Technical Support iPhone App

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
3 REPLIES
Hall of Fame Super Silver

Re: Reducing Power Transmission on multiple LAP at one time

You should be able to create a separate ap template in WCS. One for Group X and another for Group Y. Then you should be able to set the TX power level (not dbm).

Sent from Cisco Technical Support iPhone App

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
Hall of Fame Super Gold

Reducing Power Transmission on multiple LAP at one time

With 7.2.X, you can create AP Groups and set each AP Group a particular transmission power.

New Member

Reducing Power Transmission on multiple LAP at one time

Hi Scott Fella and Leolaohoo, I will give a try and keep you posted.

Thanks for the quick respond.

Best Regards,

Pascal

490
Views
0
Helpful
3
Replies
This widget could not be displayed.