Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

redundancy not forming with wlc

Hi,

We have two wlc 5508 running vers 7.4.100.60. They are not forming redundancy pair & are in maintenance mode.

Both RP's are connected physically direct.

Few outputs are given here:-

(WLC01) >show redundancy summary

Redundancy Mode = SSO ENABLED

     Local State = MAINTENANCE

      Peer State = UNKNOWN - Communication Down

            Unit = Primary

         Unit ID = 2C:11:5A:5F:C7:00

Redundancy State = Non Redundant

    Mobility MAC = 2C:11:5A:5F:C7:00

Maintenance Mode = Enabled

Maintenance cause= Negotiation Timeout

Redundancy Management IP Address................. 10.32.25.11

Peer Redundancy Management IP Address............ 10.32.25.12

Redundancy Port IP Address....................... 169.254.25.11

Peer Redundancy Port IP Address.................. 169.254.25.12

(WLC02) >show redundancy summary

Redundancy Mode = SSO ENABLED

     Local State = MAINTENANCE

      Peer State = UNKNOWN - Communication Down

            Unit = Secondary - HA SKU

         Unit ID = 10:B3:21:3C:01:B0

Redundancy State = Non Redundant

    Mobility MAC = 10:B3:21:3C:01:B0

Maintenance Mode = Enabled

Maintenance cause= Incompatible Software license

Redundancy Management IP Address................. 10.32.25.12

Peer Redundancy Management IP Address............ 10.32.25.11

Redundancy Port IP Address....................... 169.254.25.12

Peer Redundancy Port IP Address.................. 169.254.25.11

(WLC01) >show license summary

License Store: Primary License Storage

StoreIndex:  0  Feature: base                              Version: 1.0

        License Type: Permanent

        License State: Active, Not in Use

        License Count: Non-Counted

        License Priority: Medium

License Store: Evaluation License Storage

StoreIndex:  0  Feature: base-ap-count                     Version: 1.0

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

            Evaluation total period:  8 weeks  4 days

            Evaluation period left:  8 weeks  4 days

        License Count: 500 / 0 (Active/In-use)

        License Priority: None

(WLC02) >show license summary    

License Store: Primary License Storage

StoreIndex:  0  Feature: base                              Version: 1.0

        License Type: Permanent

        License State: Active, Not in Use

        License Count: Non-Counted

        License Priority: Medium

License Store: Evaluation License Storage

StoreIndex:  0  Feature: base-ap-count                     Version: 1.0

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

            Evaluation total period:  8 weeks  4 days

            Evaluation period left:  8 weeks  4 days

        License Count: 500 / 0 (Active/In-use)

        License Priority: None

In addition, other errors are also seen during the process.

Starting Redundancy: Starting Peer Search Timer of 120 seconds

Cannot open the file /mnt/application/ha/InheritedApCount.txt

Cannot open the file /mnt/application/ha/InheritedApCount.txt

Please help with all possible suggestions. thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

redundancy not forming with wlc

Hi,

i cant see that you have permenant AP count license on both.

review the following document for licensing requirement on AP SSO

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bd3504.shtml#licensing

1 REPLY
Bronze

redundancy not forming with wlc

Hi,

i cant see that you have permenant AP count license on both.

review the following document for licensing requirement on AP SSO

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bd3504.shtml#licensing

549
Views
0
Helpful
1
Replies
CreatePlease login to create content