Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Relocate Building to Different Campus in PI

I must be missing something obvious, but I am not able to figure out how to move a building to a different campus in PI 1.3.

Thanks in advance

From the configuration guide http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/maps.pdf

After adding a new building, you can move it from one campus to another without having to

recreate it.

Does anyone know off hand how to do this task?

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: Relocate Building to Different Campus in PI

Hi

It is straight forward.

First go to "Monitor -> Site Maps" & then select the building you want to move. Then choose "Move Building" option from the dropdown list & hit "Go".

Then it should ask what is the "Target Campus". Once you selet it click "OK", That's it, your building should move to the required campus. Below shows a screenshot of what I explained here.

.

Pls mark this thread as "Answered" if this is what you looking for.

HTH

Rasika

**** Pls rate all useful responses ******

2 REPLIES
VIP Purple

Re: Relocate Building to Different Campus in PI

Hi

It is straight forward.

First go to "Monitor -> Site Maps" & then select the building you want to move. Then choose "Move Building" option from the dropdown list & hit "Go".

Then it should ask what is the "Target Campus". Once you selet it click "OK", That's it, your building should move to the required campus. Below shows a screenshot of what I explained here.

.

Pls mark this thread as "Answered" if this is what you looking for.

HTH

Rasika

**** Pls rate all useful responses ******

New Member

Re: Relocate Building to Different Campus in PI

Wonderful, thanks. I was clicking on the building and then looking for the action.

225
Views
0
Helpful
2
Replies