Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Remove Web-Passthrough certificate error bypass

I'm almost positive I read somewhere on the board that there was a way tp prevent the certificate error from appearing on a Web-Passthrough portal page WITHOUT installing a certificate.  Will someone please post a link?

1 ACCEPTED SOLUTION

Accepted Solutions

Remove Web-Passthrough certificate error bypass

you can disable secure webauth

Cisco Controller) >config network web-auth secureweb enable/disable

Enable   -     Enables https for web-auth redirection.

Disable  -     Enables http for web-auth redirection.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
5 REPLIES

Remove Web-Passthrough certificate error bypass

you can disable secure webauth

Cisco Controller) >config network web-auth secureweb enable/disable

Enable   -     Enables https for web-auth redirection.

Disable  -     Enables http for web-auth redirection.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Remove Web-Passthrough certificate error bypass

Thanks!

Does this also mean that I can access the controllers gui from http:// instead of https:// now?

Remove Web-Passthrough certificate error bypass

You've always been able to do that, you just have to disable secure-web entireley, and reboot the WLC.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Remove Web-Passthrough certificate error bypass

Foreal????

I dont think I ever tried.  oh well.

Thanks!

Remove Web-Passthrough certificate error bypass

"config network webmode enable" will be needed to access the web-page of the WLC with http.

322
Views
0
Helpful
5
Replies