With an 802.11G WLAN if my AP's can see 1 or more AP's on the same channel as itself within Rx Neighbours could this be a indication of co-channel interference? - Or would this only be the case if the RSSI of the Rx Neighbor on the same channel was above a certain level?
AP has a neighbor on same channel for 2.4 GHz radio, with power. These reports on possible co-channel interference. This may or may not be relevant depending on power and application used. AP has a neighbor on same channel for 5 GHz radio, with power. These reports on possible co-channel interference. This may or may not be relevant depending on power and application used. AP has a neighbor on an adjacent channel for X GHz radio, with power. This reports possible adjacent channel interference, which may be disruptive depending on how far is the AP on channel distance, and the power received
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...