You can use the "AAA Override" feature on controller. You need to have different dynamic interfaces for different vlans configured on the controller. After sucessful authentication, radius server could pass the dynamic interface information to the controller and controller can put users to different vlans according to the feedback from radius server:
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...