07-24-2006 09:13 AM - edited 07-04-2021 12:43 PM
I have a cisco 1811W router with 32MB CF, IOS 12.4(9)T, and SDM 2.3.1 installed on laptop (XP Pro, Java 1.5). I cannot configure wireless stuff via SDM because it wants to install on router, but never can connect to router. I dont understand why because I can connect to router via telnet with a privaledge 15 user account. My research indicates SDM, IOS, and Java versions work together. Any suggestions?
07-28-2006 11:17 AM
Enable the router's HTTP/HTTPS server, using the following Cisco IOS commands:
Router(config)# ip http server
Router(config)# ip http secure-server
Router(config)# ip http authentication local
If the router uses an IPSec Cisco IOS image, the HTTPS server is enabled. Otherwise only
the HTTP server is enabled.
07-31-2006 06:43 AM
i already have all that. I have the default sdm config posted by cisco running.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide