Set AP as client

[m.ronchetti]

Hi to all,

Can I set an AP (1200 o 1300 series) as client?

My problem is that I have to connect a video network camera to a WLAN but I cannot configure it as bridge. So I ask can I associate a AP as client to WLAN and then connect to eth of AP the netcamera?

Linksys do that with WET54G, but is linksys I prefer use Cisco!

Thanks a lot.

Augusto

[Stephen Rodriguez · Accepted solution]

You would need to configure the AP as a WGB or Universal WGB. this will allow the AP to associate to the network, and have a client out the ethernet.

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43hot.html#wp1041408

HTH,

Steve