Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Setting SNMP community strings on AP1200

How do you enable SNMP on the AP1200 and how do you add the community strings to the AP?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Setting SNMP community strings on AP1200

Hello,

If your 1200 is using Cisco’s IOS view this URL

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_installation_and_configuration_guide_chapter09186a008014869d.html

If your AP is using the older OS go to the express Setup page at the bottom you will see SNMP Admin Community. You can add your community string here. Click on SNMP to view more SNMP options. This is explained here:

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo1200/accsspts/ap120scg/bkscgch3.htm#51517

1 REPLY
New Member

Re: Setting SNMP community strings on AP1200

Hello,

If your 1200 is using Cisco’s IOS view this URL

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_installation_and_configuration_guide_chapter09186a008014869d.html

If your AP is using the older OS go to the express Setup page at the bottom you will see SNMP Admin Community. You can add your community string here. Click on SNMP to view more SNMP options. This is explained here:

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo1200/accsspts/ap120scg/bkscgch3.htm#51517

263
Views
0
Helpful
1
Replies