Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

settingup cisco 340 as a repeater

trying to configure a Cisco 340 access point as a repeater, I've been

going through the instructions here:

http://www.cisco.com/en/US/docs/wireless/access_point/350/configuration/guide/ap35ch12.html

everything seems to go okay until I get to step 19 where it says:

'Step 19 On the Express Setup page, select Repeater Access Point as

the Role in Radio Network.'

but on my Express setup page there is no option for Repeater Access

Point, there is only one option called Site Survey Client, and

nothing else.

1 REPLY
Anonymous
N/A

Re: settingup cisco 340 as a repeater

To configure an AP as a repeater, the role must be changed.You must set Use Aironet Extensions to yes if the access point is set up as a repeater or if it communicates with a repeater.

Refer this guide for more information on the settings:

http://cisco.com/en/US/docs/wireless/access_point/350/configuration/guide/ap350ch3.html

153
Views
0
Helpful
1
Replies
CreatePlease to create content