Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Simultaneous a/b support on 1121G

If I set my 1121G radio to support all data rates my "b" client is unable to associate. Is there something special I need to set on the radio to allow a "b" client to associate while all data rates are supported? If I disable the "g" data rates my client connects without a problem.

3 REPLIES
Silver

Re: Simultaneous a/b support on 1121G

I do not think you are missing anything, but you should also keep in mind that when operating in mixed-mode environments, the throughput and capacity improvements are very modest.

New Member

Re: Simultaneous a/b support on 1121G

Set only the 1, 2, 5.5 and 11MBps rates to "basic" (or "require" in the web interface), the rest (ie. the 802.11g rates) to enabled.

Both b and g clients should now connect.

New Member

Re: Simultaneous a/b support on 1121G

Thanks for the information. At this time we do not have any "G" clients so I am unable to test but do anticipate future use as wireless is deployed.

151
Views
0
Helpful
3
Replies
CreatePlease login to create content