Site survey

[Mehdi Talei]

Hello,

I would like to know if I perform the site survey with a non-Cisco AP and software then I install a Cisco AP (with the same specs as the AP that I did site survey, as rx and tx power), will the result be different or I should have more or less the same result?

Thanks,

Mehdi

[Stephen Rodriguez]

If the specs are exaclty the same, then you could reasonably expect it to have the same coverage.  But YMMV.  My recommendation would be to survey with the type of AP both vendor and model, that you are wanting to implement.

HTH,
Steve