I need to connect 5 wireless users on a remote site which is 100m away from the main building. Can I use 2 Wireless Bridges (AIR-BR350-E-K9 with AIR-ANT1729 6dBi antennas), setting the remote site bridge to act as an access-point.
It seems an overkill to use an AP for the remote site with only 5 wireless users.
I've been following the post here and wanted to ask if your users at the remote site on a wired segment or wireless. If they are wired, you will need to use a WGB and either an AP or Bridge. AP < - > AP will leave the Ethernet port disabled on the AP configured as the repeater.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...