You could use netstumbler or the cisco cb-21 site survey utility to map coverage areas and IPERF/JPERF and Chariot for throughput data. Are you a Cisco reseller? If so, there is a special bundle offer available from AirMagnet right now where you can get Survey Pro and Analyzer Pro with an 802.11n card for around 3000.00 US. That's about 60% savings.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...