Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SSID Radius list not working

I have an access point that has two SSIDs.

 

I have configured the first to work with RADIUS, to connect to my corporate  network using computer account details.

 

I then thought I'd set up my second guest SSID to authenticate using Username and password from the same radius server( windows 2008 NPS).

 

My first policy is set to only allow the computer accounts and should return Cisco-AV-Pair ssid=company

 

the other policy returns Cisco-AV-Pair ssid=company-Visitor

 

My laptops can connect to either the corporate or the guest, using there Computer credentials.

 

It doesn't appear that the VSA is working. can someone please give me some advise?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

turns out the AP was working

turns out the AP was working fine there was in issue with my RADIUs config and it was hitting a default allow all, which didn't provide an SSID list.

1 REPLY
New Member

turns out the AP was working

turns out the AP was working fine there was in issue with my RADIUs config and it was hitting a default allow all, which didn't provide an SSID list.

39
Views
0
Helpful
1
Replies
CreatePlease to create content