Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

standby AP and VLAN

hallo, I'm configuring an ap 1240ag to backup another ap 1240ag throughout the standby feature.

IOS Version 12.3(8)JA2.

The main ap (AP1) has VLANs.

Vlans works fine in wireless an wired network.

The standby ap (BK1) associates to the main ap (AP1)but the standby process does not work. The BK1 ap is always in active mode.

With debug iapp errors I have this message:

BK1#*Mar 1 00:20:11.406: IAPP: Error - WGB check primary hwidb is NULL or not virtual

I attachede the two ap configs

Which could be the problem ?

best regards

francesco

1 REPLY
Silver

Re: standby AP and VLAN

Except the ip address everything else needs to be the same. Check the configurations. On Primary choose Fallback Radio mode to shutdown. http://cisco.com/en/US/docs/wireless/access_point/12.3_7_JA/configuration/guide/s37hot.html#wp1037483 for more configuring Hot standby protocol.

285
Views
0
Helpful
1
Replies
CreatePlease to create content