Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

startup problem with encryption

Trying to configure my Aironet adapter (AIR-CB21AG-A-K9) with my home access point, but am having a slight problem. When unencrypted, it finds the AP and connects right up. When I add encryption (WP AES), it doesn't connect automatically. It just keeps scanning . I basically have to modify the profile setting (just changing the valid wireless modes on/off) get's it to connect. Have to go through this same process each time wireless is re-enabled. Any suggestions?

2 REPLIES
Green

Re: startup problem with encryption

Are you using the Cisco client software, or Microsoft Zero Wireless Config?

If you are using the Cisco client software, what version are you using?

Let us know

Scott

New Member

Re: startup problem with encryption

I'm using the Cisco Aironet Desktop Utility.

Config Utility 3.00.296

Appl Interface 3.00.296

Auth Interface 1.0634.5

Auth Protocall Driver 1.0.0.44

Wireless Device Driver 3.0.0.104

147
Views
0
Helpful
2
Replies