I would like to set up 2x 1300 so as to connect another building LAN to the main office corp LAN.
At present I am running this as Main Office is in : Root AP role and far end office as Workgroup Bridge role. My concern is that I dont want wireless clients attempting to connect up to the root AP as this solution doesn't require it. From the Cisco documentation I cannot see the difference between this set up and running a 'root to non root' set up? Would this be better? What is the correct way to setup this kind of design. Any ideas much appreciated? :)
In a point-to-point bridge configuration, two bridges connect two remote LAN networks using a wireless communication link (see Figure 1-4). The bridge connected to the main LAN network is classified as a root bridge and the other bridge is classified as a non-root bridge.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...