Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Suggested IOS for 1532i Wireless Bridge

Hello all,

I'm currently running IOS version 15.2.4-JB3b(ED) for two autonomous point-to-point bridges.  I'm having difficulty getting one of the bridges to stop flapping and autonegotiating at 10/full.  The other side seems to be stable and will autonegotiate at 1000/full.  I've had a 2nd cable run installed and terminated.  I've tried rebooting both the power injector and the bridge in question.  I've tried setting the switch port and bridge to 1000/full statically.  But all my attempts to resolve this issue has failed.  I'm not sure if this version of IOS for the 1532s are buggy but can someone point me to which IOS has been stable for them?  Thanks!

 

Regards,

Terence

2 REPLIES
VIP Purple

Hi Terrence,Did you try this

Hi Terrence,

Did you try this one ? It is released when 8.0 came out & worth trying.

ap1g3-k9w7-tar.153-3.JAB.tar

NB: I haven't got those AP model in my environment,so does not have first hand experience.

HTH

Rasika

**** pls rate all useful responses ****

New Member

Thanks Rasika,I'll give this

Thanks Rasika,

I'll give this image a try and will let you know if I still get the same results or if it's successful.

Regards,

Terence

70
Views
0
Helpful
2
Replies