Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Supress Log event with a specific log id?

I would like to suppress a warning event log entry on a WLC with the log ID #APF-6-USE_DEFAULT_CIPHER_SUITE

 

Is there any way to do this on WLC? It's a very chatty message that really isn't a warning in my opinion.

2 REPLIES

I am sorry to say that i am

I am sorry to say that i am not able to find any command to supress the logs. Only command i can find is To delete the existing event log and create an empty event log file for a specific access point or for all access points joined to the controller, enter this command:

clear ap-eventlog {specific Cisco_AP | all}

VIP Purple

These are informational level

These are informational level (sev 6) syslog messages. Unless you really want to monitor all of those, I would only monitor error (3) or warnings(4) level & below syslogs. If you want you can go notification (5) level syslogs messages if above is not sufficient.

http://mrncciew.com/2013/02/06/syslog-msg-log-in-wlc/

In these WLCs you cannot suppress a particular syslong msg. This feature available in IOS based devices (router switch, etc). Here how you can do it on that type of device.

http://mrncciew.com/2013/07/27/suppress-a-syslog-msg/

 

HTH

Rasika

*** Pls rate all useful responses ****

 

118
Views
0
Helpful
2
Replies
CreatePlease to create content