TACACS+ not working on WLC

[jamaludeen_kc]

Hi All,

I have configured tacacs for WLC. But I am not able to login to WLC using TACACS username and password.

Getting following message

Tue Sep 22 15:26:50 2009: Forwarding request to 10.0.0.1

6 port=49

Tue Sep 22 15:26:50 2009: tplus response: type=1 seq_no=2 session_id=ecf27238 le

ngth=6 encrypted=0

Tue Sep 22 15:26:50 2009: TPLUS_AUTHEN_STATUS = UNKNOWN(1)

Thanks

Jamal.S

[Lucien Avramov]

Please turn on the WLC CLI:

debug aaa all enable

And post the output

Are you using ACS as a TACACS server?

[jamaludeen_kc]

Thanks for you reply...

Attached logs taken from Live WLC.

ACS IP's : 165.28.96.150,165.28.32.146.

Tacacs user ID : q03670

[Lucien Avramov]

There is radius happening on the auth portion of the WLC.

There seems to be a misconfiguration issue.

What do the ACS failed logs say?

Can you make sure you followed exactly:

http://cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60sol.html#wpmkr1261119

[jamaludeen_kc]

Hi..

The problem is fixed now...Actaully there is a TACACS Key mismatch between ACS and WLC.

Thanks a lot for your wonderful support.

[Lucien Avramov]

Great!

I guess we can mark this post resolved then.