04-07-2010 01:57 PM - edited 07-03-2021 06:41 PM
Hi
I am trying to connect to a remote Access point within our network..is that possible to enable telnet or ssh in the access point through WCS or https. please let me know
Karthik
Solved! Go to Solution.
04-07-2010 03:08 PM
From WCS you could push an AP template. On the "AP Parameters" tab you can enable ssh and telnet access then apply it to the AP.
http://www.cisco.com/en/US/partner/docs/wireless/wcs/6.0/configuration/guide/6_0temp.html#wp1064409
04-07-2010 03:08 PM
From WCS you could push an AP template. On the "AP Parameters" tab you can enable ssh and telnet access then apply it to the AP.
http://www.cisco.com/en/US/partner/docs/wireless/wcs/6.0/configuration/guide/6_0temp.html#wp1064409
04-07-2010 03:40 PM
thanks a lot that was working fine..but i was not able to got the link you gave me , yet your advice was working
04-07-2010 05:05 PM
Sorry about that I gave you the internal link:
http://www.cisco.com/en/US/customer/docs/wireless/wcs/6.0/configuration/guide/6_0temp.html
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: