Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

The easiest way to deploy a new controller?

Can someone share how do you deploy a new controller to exsiting mobility group? the new controller need to have the exactly same configurations with the exsiting controllers except the IP addresses. I usually configure the IPs to the new controller first, then add it to WCS and apply all templates one by one. Is there a easier way to do this? Thanks.

1 REPLY

Re: The easiest way to deploy a new controller?

Dennis,

     That is the easist way, depending on the code.  You could look into using the auto provisioning.  This is when you connet a WLC to the network, and it can reach out to WCS to pull it's config.

http://www.cisco.com/en/US/docs/wireless/wcs/6.0/configuration/guide/6_0admin.html#wpmkr1073597

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
271
Views
5
Helpful
1
Replies
CreatePlease login to create content