Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

To Bridge, or not to bridge DHCP for Hreap?

I am doing an Hreap, AKA FlexConnect setup with the WLC in a Colo. In the setup it asks if I want to bridge DHCP.  Which will be a better solution to this, Proxy or Bridge?  The DHCP will be coming from servers local to each location, there are 5 locations with 2 SSID's each.

Everyone's tags (3)
4 REPLIES

Re: To Bridge, or not to bridge DHCP for Hreap?

You'll want ti bridge the traffic. Just make sure you have the ip helper configured if your shop is on a different subnet from the VLAN the client is on.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: To Bridge, or not to bridge DHCP for Hreap?

Would the helper be on the router interface of that VLan then?

Re: To Bridge, or not to bridge DHCP for Hreap?

One the L3 interface.  So whethe that's the VLAN or the sub-interface on the router, either should work

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: To Bridge, or not to bridge DHCP for Hreap?

OK thanks, I will give it a try and see how it goes.

618
Views
0
Helpful
4
Replies
CreatePlease login to create content