09-18-2007 04:01 PM - edited 07-03-2021 02:38 PM
Hiya
Currently we are installing Aironet 1131s. The DHCP server provides IP addresses after MAC authentication.
The root aironet units work fine. A wireless device can connect and will receive an IP address. However when we add an aironet repeater, devices will connect to it, but will not receive a network IP address. The repeater is communicating with the root unit, seems all we need to solve is the IP problem.
09-28-2007 12:54 AM
Are you certain the repeater AP is correctly associating with the root AP? Does it appear in the list of clients? An additional test would be to set the repeater AP to get it's IP address through DHCP and then see if it picks up an IP address via DHCP.
09-30-2007 11:38 AM
Thanks for your reply.
Seems we needed to specify our particular country mode (In this case NZ) and then it started working fine.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: