I want to deploy a number of WAPs to various sites. They will all follow a template, but there will be some variables (value changes per site). I want to preconfigure / stage the config for each WAP on a controller and then drop ship the APs to the sites. I want the APs to boot up, obtain DHCP optioning and then download their respective config from the controller. I do not want to have to wait until each AP comes online then log in to the controller and enter the site specific variables. I want to fill in the variables in advance of the AP being installed / booting up. What is the best way for me to go about doing this? Can someone point me to some documentation?
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...