Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.
see attached document.in this scenario i want pass my three VLAN information throght aironet 1300. is that possibale ?
please tell me how to done it ?
Yes it is. You need to configure Ethernet and Radiointerfaces with bridge-group and a SSID for that vlan.
dot11 vlan-name hfm vlan 207
dot11 ssid VLAN207
authentication key-management wpa
wpa-psk ascii password
encryption vlan 207 mode ciphers aes-ccm tkip
encapsulation dot1Q 207
no ip route-cache
thats it, basically. be aware that bvi1 (management) has to be in native vlan, asume vlan 42 is your management:
encapsulation dot1Q 42 native