Trying to Authenticate users with AP1220 thru Radius Server
I have set up a windows RADIUS server to integrate with AD and have configured an AP1220 (v12.3(8)JEB) to authenticate a user logon thru EAP. It appears that I have the configuration correct on the AP and I can see the laptop showing as "association processing" thru the web interface of the AP. The laptop itself, tho, appears unable to authenticate and the wireless card reports "windows was unable to find a certificate to log you onto the network". What am I missing here? Thanks in advance for your replies.
Re: Trying to Authenticate users with AP1220 thru Radius Server
We got it working with self generated certificate (IAS) but have found that there is going to be several places that the user will need to modify configuration in order to make this work. We have just sent in for a store bought (thawte) certificate and are hoping that once this is installed the user interface will be much friendlier (accept certificate - log ion box appears - authenticate and boom your in). Can you confirm that this would be the case with a legit cert? Thanks in advance.
IntroductionHow to use the Wireless LAN Controller Configuration Analyzer (WLCCA)
Javier Contreras is a Senior Tech Lead for the Wireless Business Unit in Cisco, with over 2 decades of experi...
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...