Two WLC over the same SUBNET - selection from AP for determinate WLC
I have the next problem, my company have two WLC (WISM1 - IOS 7.0 and WLC2504 - IOS 7.4), and we have 4 types of APs (1131, 1242, 1040 and 1600), well the WISM 1 manages the old APs 1131, 1040 and 1242, the 2504 manages the 1600, this because the WISM 1 don't support the 1600
Well my question its how i can assigned to APs 1131, 1242 and 1040 to connect to WISM1 and not to 2504 , both are on the same subnet and the Ip its send for DHCP with option 43, others for DNS and apparently some of my APs connected to the 2504, I wish only connect to WISM 1
How i can set priority in the AP for conect to WISM1?, i read the High Availability on the AP, this is enough or should we make any extra settings the WLC
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...