Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Unable to assign static IP on AIR-LAP1262N-E-K9

                  We recently procured the above mentioned AP but I am unable to go to the "config t" mode so that I can assign the IP address. I want to deploy this on my network as an AP and I read somewhere that I will need to upgrade the IOS to another version. Can some body assist with instructions on where to get the new image (and name) and how to proceed with the upgrade. Thanks 

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Silver

Re: Unable to assign static IP on AIR-LAP1262N-E-K9

The AP you have is a lightweight access point... "LAP". This requires a WLC.

If you wanted a standalone/autonomous AP, the model designation is "SAP".

What you have to do if you want to convert this to autonomous is download the autonomous image, which you will need a support contract and follow one of these conversion process examples.

Using a TFTP Server to Return to a Previous Release

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

https://supportforums.cisco.com/docs/DOC-18268

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

http://www.youtube.com/watch?v=QQ_NuxdRhQ4

https://supportforums.cisco.com/docs/DOC-14960

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
VIP Purple

Unable to assign static IP on AIR-LAP1262N-E-K9

Here is another post explaining the same thing, may be useful to you

http://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/

HTH

Rasika

*** Pls rate all useful responses ****

6 REPLIES
Hall of Fame Super Silver

Re: Unable to assign static IP on AIR-LAP1262N-E-K9

The AP you have is a lightweight access point... "LAP". This requires a WLC.

If you wanted a standalone/autonomous AP, the model designation is "SAP".

What you have to do if you want to convert this to autonomous is download the autonomous image, which you will need a support contract and follow one of these conversion process examples.

Using a TFTP Server to Return to a Previous Release

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

https://supportforums.cisco.com/docs/DOC-18268

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

http://www.youtube.com/watch?v=QQ_NuxdRhQ4

https://supportforums.cisco.com/docs/DOC-14960

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Unable to assign static IP on AIR-LAP1262N-E-K9

Dear Scott, Thanks for the information. I will try this.

VIP Purple

Unable to assign static IP on AIR-LAP1262N-E-K9

Here is another post explaining the same thing, may be useful to you

http://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/

HTH

Rasika

*** Pls rate all useful responses ****

New Member

Unable to assign static IP on AIR-LAP1262N-E-K9

Dear Rasika, Thanks for the useful information I was able to convert the AP image to autonomous.

New Member

Unable to assign static IP on AIR-LAP1262N-E-K9

Scott, Thanks so much your solution worked.

Hall of Fame Super Silver

Re: Unable to assign static IP on AIR-LAP1262N-E-K9

Here is a link for the code you would need for autonomous.


WIRELESS LAN
ap3g1-k9w7-tar.152-4.JB3a.tar 24-DEC-2013 128 / 32

http://software.cisco.com/download/release.html?mdfid=283307705&flowid=16361&softwareid=284180979&release=15.2.4-JB3a&relind=AVAILABLE&rellifecycle=ED&reltype=latest

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
391
Views
0
Helpful
6
Replies
CreatePlease to create content