Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unable to boot MSE3355 after power failure

Hi,

After a power failure the MSE did not come back up.

I connected to the console to see what was wrong, and I found that the service dit not run.

After a couple of failed attempts to start the service without any luck (I did get some errors, but I don't have a log of them)

I decided to try a reboot, and now the server doesn’t even start.

What can I do?

Below the last thing I get from the console

  Booting 'Red Hat Enterprise Linux Server (2.6.18-274.17.1.el5)'

root (hd0,0)

Filesystem type is ext2fs, partition type 0x83

kernel /vmlinuz-2.6.18-274.17.1.el5 ro root=/dev/VolGroup00/LogVol00

   [Linux-bzImage, setup=0x1e00, size=0x20097c]

initrd /initrd-2.6.18-274.17.1.el5.img

   [Linux-initrd @ 0x37ca5000, 0x34a940 bytes]

ÿ

I hope somone can help

Thank you

Aksel

Everyone's tags (6)
1 ACCEPTED SOLUTION

Accepted Solutions

Unable to boot MSE3355 after power failure

Open a TAC case.  probably going to be RMA'ing that unit

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
2 REPLIES

Unable to boot MSE3355 after power failure

Open a TAC case.  probably going to be RMA'ing that unit

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Unable to boot MSE3355 after power failure

Thank you I will try that.

Aksel

559
Views
0
Helpful
2
Replies
CreatePlease login to create content