Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unable to Connect to Cicso Aironet 1250

My office just bought the Cisco Aironet 1250 and I am task to set it up. Right now, I am unable to connect to AP even when it is configured as Open Authentication without encryption. Tried using both laptops and our products to no avail. The same laptops and products are able to connect to other wireless routers So far, only my Linksys Wireless-G USB network Adapter is able to detect it.

We are very puzzled by this because we are able to setup and connect to it initially. But when we try to reconfigure it to another setting, everything starts to fail. We have tried doing factory default.

The AP is connect only to a Windows 2003 Server running DHCP and IAS. Appreciate if someone can help me on this. Thanks

4 REPLIES

Re: Unable to Connect to Cicso Aironet 1250

Can you post your AP configuration?

Without it, it is difficult to know why it is failing.

BTW, do you broadcast the SSID (if you do show run, do you see "guest-mode" under the dot11 ssid section?

Thanks

Jerome

Hall of Fame Super Gold

Re: Unable to Connect to Cicso Aironet 1250

Basic Wireless LAN Connection Configuration Example

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008055c39a.shtml

Hope this helps.

New Member

Re: Unable to Connect to Cicso Aironet 1250

Yes, SSID is set to broadcast.

886
Views
0
Helpful
4
Replies