Unable to gather data during Site Survey on WLSE Express
I am trying to use the Assisted Site Survey on our WLSE Express. I can get to the point where I can do my Walkabout with the client and gather data. Upon doing the client walkabout I can 'never' gather any data.
I have even purchased a Cisco WIreless card in hopes that this will be the answer.
Anyways, we need to do some sort of site-survey to help us setup our APs.
Re: Unable to gather data during Site Survey on WLSE Express
If you do not perform a client walkabout, you must enter a floor plan that includes the distances between APs
Instead of using Client Walkabout, you can use the Assisted Site Survey wizard, which is part of Location Manager, to walk you through the process of determining the optimal radio transmit power and channel selection. This wizard interface steps you through AP radio scan, client walkabout, and radio parameter generation
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...