Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unable to Join

Hi,

I have a problem with the Cisco 2500 Series.
I have 7 AP connected to the CiscoWlanController
All those 7 are from type: AIR-LAP1142N-E-K9. They work perfect

Our building got more big, and i need a 8th AP. Sadly i couldnt by a 1142N anymore.
So, I bought a AIR-CAP1602I-E-K9. I connected this on the same trunk port the other one.

Via the Console port i see this error:
*Mar 28 11:05:57.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.99.246 peer_port: 5246
*Mar 28 11:05:57.471: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.99.246 peer_port: 5246
*Mar 28 11:05:57.471: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.99.246
*Mar 28 11:05:57.475: %DTLS-5-ALERT: Received WARNING : Close notify alert from 192.168.99.246
*Mar 28 11:05:57.475: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.99.246:5246
*Mar 28 11:05:57.475: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Mar 28 11:05:57.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.99.246 peer_port: 5246
*Mar 28 11:05:57.475: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.99.246 peer_port: 5246
*Mar 28 11:05:57.475: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.99.246
*Mar 28 11:05:57.475: %DTLS-5-ALERT: Received WARNING : Close notify alert from 192.168.99.246

At the CiscoWlanController Trap Logs I see:

Fri Mar 28 11:05:57 2014    AP with MAC 24:e9:b3:4b:e7:30 (AIR-CAP1602I-E-K9) is unknown.

Importend Note i think you should know. I didnt do ANYTHING in the config and it is like this out of the box.
What im doing wrong?

Trunk port have vlan 10,100,200 tagged, 1 untagged.
Power is currenty with an extra adapter becourse my test switch dont have PoE. We have Lisences for 8 AP's

Everyone's tags (1)
1 REPLY
VIP Purple

Hi,Fri Mar 28 11:05:57 2014  

Hi,

Fri Mar 28 11:05:57 2014    AP with MAC 24:e9:b3:4b:e7:30 (AIR-CAP1602I-E-K9) is unknown.

First point: 1602 AP need the minimum software 7.4.100.0 version on Controller. make sure your WLC have atleast this version, Check this matrix:

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

 

Also paste the output of this:

sh sysinfo from WLC.

 

Regards

Dont forget to rate helpful posts

146
Views
0
Helpful
1
Replies
CreatePlease login to create content