cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
388
Views
0
Helpful
1
Replies

Update Controller IP in Prime 1.3

After updating a Controller IP I am not finding the option to update that information in Prime. It would appear I must remove the controller and add it again. Is this correct or am I missing an option?

Thank you

1 Accepted Solution

Accepted Solutions

Yes, if you change the WLC IP, then you have to remove & re-add it to Prime.

Keep in mind when you adding a WLC to prime you use the WLC IP, so if you change WLC IP, prime assuming WLC is down, no way to determine what IP you have changed.

HTH

Rasika

**** Pls rate all useful responses ****

View solution in original post

1 Reply 1

Yes, if you change the WLC IP, then you have to remove & re-add it to Prime.

Keep in mind when you adding a WLC to prime you use the WLC IP, so if you change WLC IP, prime assuming WLC is down, no way to determine what IP you have changed.

HTH

Rasika

**** Pls rate all useful responses ****

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: