Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

update wireless controller 4402 firmware problem

I have Cisco Wireless Controller: 4402. Current Software Version: 5.0.148.2. I want to update current software version to AIR-WLC4400-K9-7-0-230-0

I download two files from Cisco website: AIR-WLC4400-K9-7-0-230-0.aes and AIR-WLC4400-K9-7-0-230-0-ER.aes.

I try to firstly upload the AIR-WLC4400-K9-7-0-230-0.aes to the controller by tftpd32 or 3CDaemon. However, when the data has been transferred to 66MB. Stop. I get the error from tftpd32

"

Connection received from 10.203.220.200 on port 7714 [28/02 20:20:14.195]

Read request for file <./AIR-WLC4400-K9-7-0-230-0.aes>. Mode octet [28/02 20:20:14.196]

Using local port 53336 [28/02 20:20:14.197]

File <.\AIR-WLC4400-K9-7-0-230-0.aes> : error 10054 in system call recv An existing connection was forcibly closed by the remote host. [28/02 20:20:52.521]

"

I know maybe it is because of big size file.

What shall I do to handle this problem.

5 REPLIES

Re: update wireless controller 4402 firmware problem

5.0 has the large tftp fix, so you should be able to directly upgrade.

I would try rebooting the WLC, then doing the transfer again.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: update wireless controller 4402 firmware problem

the version of tftpd32 I use is 4.0. Where can I download the 5.0? I google it. Not available.

tonight I will reboot the controller to have a test

Hall of Fame Super Silver

Re: update wireless controller 4402 firmware problem

If you still have issues after the reboot use 3cdeamon I use 3cdeamon with no issues.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Re: update wireless controller 4402 firmware problem

I reboot the WLC. However,  it is still at the issue.

I tried 3cdeamon. I get the error code "66MB, Got socket error. Aborting!Code=10054"

I tried tftpd32. Also problem.

New Member

Re: update wireless controller 4402 firmware problem

I reboot the controller. it is still at the issue.

629
Views
0
Helpful
5
Replies