Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Updating the IOS for a Aironet Air-AP1231G-K9 using TFTP

I have an aironet 1200 series AP model AIR-AP1231G-A-K9. The IOS is 12.2(13)JA4 Boot Loader 12.2(8)JA

I am trying to upgrade the IOS using c1200-k9w7-tar.122-13.JA4 using ATFTP server. I am using linux and have setup a tftp server

I know the tftp server is working fine and am using this walk through from Cisco and I cant figure out why it wont upgrade from the console.

http://cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43mfw.html


2 REPLIES
Hall of Fame Super Gold

Re: Updating the IOS for a Aironet Air-AP1231G-K9 using TFTP

What error messages are you getting?  What command did you use?

Hall of Fame Super Silver

Re: Updating the IOS for a Aironet Air-AP1231G-K9 using TFTP

If you can CLI to the AP then use the archive command:

archive download-sw {/force-reload | /imageonly | /leave-old-sw | /no-set-boot | /no-version-check | /destination-system stack-member-number | /only-system-type system-type | /overwrite | /reload | /safe} source-url

I usually use archive download-sw /f /o tftp:///

-Scott
*** Please rate helpful posts ***
1183
Views
0
Helpful
2
Replies