Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upgrade of AP1210 system

Hi! we have 3 wifi spots installed with the following configuration:

AIR-AP1210 IOS AP, Cbus&MPCI slots EnetUplink

AIR-PWR-SPLY-CE AIR line cord central EU/Universal

S12W7K9-12302JA Cisco 1200 series IOS wireless LAN

AIR-ANT4941 2 x 2.4 GHZ, 2.2dBi dipole ant + RP-TNC connect

AIR-MP21G-E-K9 802.11g configurable radio module for AP

We want to add three more spots with exactly the same configuration to preserve homogeneity, however I have noticed that there is a AIR-MP21G-E-K9= module that supposedly upgrades AIR-MP21G-E-K9.

What is the difference and benefits of the upgrade? Should I buy SIX of those modules in order to upgrade the whole infrastructure?

Best regards.

2 REPLIES
Hall of Fame Super Red

Re: Upgrade of AP1210 system

Hi Javier,

From what you have listed for the 3 existing 1210 AP's, they already have this upgrade kit installed :) So you could just go ahead and order the equivalent parts for the 3 new locations.

Hope this helps!

Rob

Hall of Fame Super Red

Re: Upgrade of AP1210 system

Hi Javier,

From what you have listed for the 3 existing 1210 AP's, they already have this upgrade kit installed :) So you could just go ahead and order the equivalent parts for the 3 new locations.

http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps430/product_data_sheet0900aecd801b9233_ps4570_Products_Data_Sheet.html

Hope this helps!

Rob

148
Views
0
Helpful
2
Replies