Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrading IOS on AP1130AG

I am trying to find out if the bootloader version and the system software version must match eachother. I downloaded the new IOS for our AP1130AG's.

File: c1130-k9w7-tar.123-8.JEA2

From the web based GUI on one of my 1130's I selected System Software>>Software Upgrade>>.

Browsed to the tar file and let the device upgrade and reboot.

The thing I don't get is, when I look at the device now its version reads the following:

Product/Model Number: AIR-AP1131AG-A-K9

Top Assembly Serial Number: FTX0XXXXXXXXXXX

System Software Filename: c1130-k9w7-tar.123-8.JEA2

System Software Version: 12.3(8)JEA2

Bootloader Version: 12.3(7)JA1

System Uptime: 35 minutes

Should the bootloader version match the system software version? If so, how can I makethat happen? Is there a file I must download?

Thanks!

2 REPLIES
Hall of Fame Super Red

Re: Upgrading IOS on AP1130AG

Hi Paul,

No worries here my friend :) This is standard and they don't need to match. Here is another example of an old AP we had kicking around;

Model info and software versions below:

Product/Model Number: AIR-AP1121G-A-K9

Top Assembly Serial Number:

System Software Filename: c1100-k9w7-tar.123-8.JEB1

System Software Version: 12.3(8)JEB1

Bootloader Version: 12.3(2)JA4

Hope this helps!

Rob

New Member

Re: Upgrading IOS on AP1130AG

Thanks Rob!

408
Views
0
Helpful
2
Replies