Using a BR350 and AP350 to link 2 buildings together?
Can I use a br350 and a ap350 to link 2 buildings together or do I need to use a br350 and a wgb350 to link them together? Whats modes should the radio's be set in if the ap and the br work together? Thanks in advance!
Re: Using a BR350 and AP350 to link 2 buildings together?
I would recommend that you use a Non-Root BR to connect to the other side,and then connect the WGB, this will give you a more stable,reliable and scalable solution, over the time and that would really be a good investment from the future perspective.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...