Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

using a username and password to access the network

Dear gents,

i am trying to make the access to the network via 2 things : SSID's key first , then using a username and password to connect, or at least username and password.

i have aironet 1130ag , and 40 users.

Any suggestions..

1 REPLY
New Member

Re: using a username and password to access the network

SSIDs are unique identifiers that identify a WLAN network. Wireless devices use SSIDs to establish and maintain wireless connectivity. SSIDs are case-sensitive and can contain up to 32 alphanumeric characters. Do not use any spaces or special characters in an SSID.

A client can gain access to the network only if the client password matches the AP password.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml

141
Views
0
Helpful
1
Replies
CreatePlease to create content