Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Using Aironet 1300 as BRIDGE to Aironet 1522 2.4 GHz Radio

Can Aironet 1300 be used to bridge a Workgroup LAN (Building)to the 2.4 GHz Radio (AP)of the Aironet 1522.

What I mean is that if a campus have a Mesh Wireless with Aironet 1522. Can I connect a building LAN to the Mesh Wireless by using Aironet 1300 as a Bridge to the 2.4 GHz Radio Omni Antenna of the Aironet 1522.

Thanks in advance

6 REPLIES
Silver

Re: Using Aironet 1300 as BRIDGE to Aironet 1522 2.4 GHz Radio

A 1300 cannot join a mesh under either IOS or LWAPP.

New Member

Re: Using Aironet 1300 as BRIDGE to Aironet 1522 2.4 GHz Radio

Please, which of the Aironet Bridges can join the mesh. Or Do You have a better solution how to join a LAN Workgroup.

Thanks for the assistance

Nala

Silver

Re: Using Aironet 1300 as BRIDGE to Aironet 1522 2.4 GHz Radio

You can use an 1130 or 1240, or another 1500.

New Member

Re: Using Aironet 1300 as BRIDGE to Aironet 1522 2.4 GHz Radio

Thanks GAMCCALL

I would like to know if I can deploy a Wireless Mesh with Aironet 1522 without using a Wireless Controller.

Please, if You have more tips about Aironet 1130 and Aironet 1240, I would be most grateful

Nala

Silver

Re: Using Aironet 1300 as BRIDGE to Aironet 1522 2.4 GHz Radio

The 1500-series access points require wireless controllers. There is no autonomous code option for this access point, and there is no Mesh functionality in IOS.

New Member

Re: Using Aironet 1300 as BRIDGE to Aironet 1522 2.4 GHz Radio

Thanks GAMCCALL

Nala

161
Views
0
Helpful
6
Replies
CreatePlease to create content