I can not find enough info to explain the use of splitter , I have this scenario I hope someeone can advise .
I have a small building with one floor and a roof ,
Doing the site survey with different positiong of the AP , I can cover the floor but nothing on the roof , Can I use splitter with one antenna in the floor and another on the roof (20 meter away) , note that number of user in 4 for the floor and 1 for the roof .
Should not be a proble as long as you choose a good splitter and RF cable. LMR400 at least. The splitter will give you an insertion loss of 0.5 dB at 2500 MHz. Your antennas I am assuming are omni directional with at lest 3-5 dBi gain. As long as your cable runs are kept to a minimum it should be fine.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...