Virtual WLC supported Access Points

[Prasan Venky]

Dear All,

I read minimum code version of AP should be 7.3.

Someone please tell me the supported AP models for VWLC 7.4 series..?

KVS

[Scott Fella · Accepted solution]

The min code that the virtual can run was v7.3. Here is the supported code matrix. You can see which Sonia supported on what code.

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

Sent from Cisco Technical Support iPhone App

[Prasan Venky]

Many thanks for your reply.

So, Access points that are supported 7.3 code can be used to register with vWLC..?

7.3.x

1522, 1524PS, 1524SB, 1552E, 1552H, 1552I, 1552C, 1552EU, 1552CU, 1552S, 1130, 1240, 1250, 1260, 2600, 3500e, 3500i, 3600e, 3600i, 3500p, 1140, 600 OEAP, AP801, AP802

Thanks in advance...

[Scott Fella]

That is correct.

Sent from Cisco Technical Support iPhone App

[aqjaved]

Case Solution:

Please check the below link for Wireless LAN Controller Software Release Compatibility Matrix.

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.pdf

This link will be more helpful for you

[Scott Fella]

Aqeel,

I already posted that link.

Sent from Cisco Technical Support iPhone App