We have a couple of APs that do not show the Vlans and SSIDs through the AP web interface. If you go to the SSID manager page in web interface, the page comes up but does not show any of the SSIDs configured. The same goes for Services - Vlan. That page comes up but does not show any Vlans configured. If you telnet to the APs, you see the listed mssid and all the SSID interfaces. The SSIDs on the APs are functional and working. This just makes it difficult to use the web interface for these APs. I have tried to compare running configs on APs where web interface is not showing this and on APs that it is showing but cannot see any differences.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...