Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

VLANs in WLC

HI,

I went through below link

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

I have the same setup except the dhcp.

I have dhcp server which is givng IP to clients; I want to divide clients as bulding 1 and building 2 with vlan

But they should get IP from same dhcp server

how can I do it?

6 REPLIES

VLANs in WLC

Have you created ap-group per building and did interface over-ride

Thanks

NikhiL

Community Member

VLANs in WLC

what is interface override???

I have lag enabled on wlc

VLANs in WLC

Configure it like this

Create AP-Groups in the WLC for each of the building

Create dynamic interfaces for each building

Under WLAN>Ap-Groups, add each AP in each building, in the respective AP-Groups

Map the WLAN to the AP-groups to the interface for each building ( you can see an option, Add interface mapping in the document you sent)

Thanks

NikhiL

Community Member

VLANs in WLC

what about the vlan,

i need to configure vlan 4000 and 4001

first buldng aps will be in vlan 4000 and second bldng will be in 4001

right now i have only 4001 enabled

VLANs in WLC

Create VLAN 4000 also and configure the AP port in VLAN 4000. If you want the client to get ip address in vlan 4000, create a dynamic interface in the WLC in vlan 4000 and map it to the WLAN

Thanks

NikhiL

Cisco Employee

VLANs in WLC

496
Views
0
Helpful
6
Replies
CreatePlease to create content