Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VLANS on AP1200B

I have an AP 1200b (12.02)on a Cisco 3524XL Switch connected to an trunked Port (dot1q). I allready configured 3 VLANS (and there is no Problem with the configuration) with 128bit WEP but when I switch with the Wireless-Client from the native VLan (VLAN Nr. 109) to another created VLAN (VLAN Nr. 313) there is no possible Connection. The VLANS allready exist in the wired Area.

Any Idea?

Hartmut

2 REPLIES
Bronze

Re: VLANS on AP1200B

Make sure that when you are switching from one VLAN to another that you are changing the SSID and WEP key if applicable to match the new VLAN on the wireless client.

New Member

Re: VLANS on AP1200B

When I change the VLAN, the SSID and Wep-Key will also change.

I am not the only one who have these Problem.

I had contactet a CCNP by Siemens/ Germany and he also have this Problem by configure an AP 1200B and could not help me.

Regards

Hartmut

141
Views
0
Helpful
2
Replies