Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VLANs over bridges to an AP

I have my wired network (w/DHCP and vlan scopes). Attached to the wired network is a 1400 series bridge1 connecting to another 1400 bridge2 (via 802.11a). Bridge 2 connects to a 1200 Access point via a straight ethernet connection. I want to use VLANs on the access point. I configured the trunk between the wired network and Bridge1. I configured the VLANs and SSIDs on the AP, but I’m unable to get an ip address when connecting to vlan2/ssid (vlan 1 is the native vlan and works fine). Any suggestions?

1 REPLY
Silver

Re: VLANs over bridges to an AP

check whether DHCP option 43 is enabled

117
Views
0
Helpful
1
Replies